Pins

From Bottle School Wiki

Jump to: navigation, search
Pins in wood forms
caption goes here
  • Pins are needed to hold the chicken wire on the outside and inside of all walls where you will place bottle bricks
  • Pins are made from 1/4 inch rebar, cut to the length
  • Pins should be placed the width of one bottle plus 1cm inside the columns and beams from their outside edge, spaced around 20-25cm apart
  • 8cm from the outside edge for bottles 20 ounces and smaller
  • 8 cm. will give you enough space to bend the pins outward when you install the chicken wire with the 1/4 inch rebar.
  • Drill holes into the forms to hold the pins in place


caption goes here
caption goes here
caption goes here
caption goes here
Retrieved from "http://bottleschools.org/wiki/Pins"
Personal tools